On Mon, 16 Dec 2013 18:48:32 +0100
Djého Youn wrote:
Headphoune out is a different impedance than line out, it's really easy
to overload a line input. I'm a little suspicious of the level into the
main mixer though; you should have had more than enough signal for the board.
I suspect there was some user error at the mixer.
> this looks quite nice...as it's preamp AND soundcard...if soundcard doesn't
I use an ART DualPre (not the tube model) with ArchLinux regularly with
no issues at all. It worked fine when I used Fedora as well but I
switched to Arch a while back and havent tested it in a while. There
shouldn't be any driver issues, it follows the USB audio interface spec
The ART will give a much better signal, and the line outs use balanced 1/4"
TRS connectors so you can get a quieter signal if you use the appropriate
Joe Hartley - UNIX/network Consultant - firstname.lastname@example.org
Without deviation from the norm, "progress" is not possible. - FZappa
Linux-audio-user mailing list