On Wed, 2013-10-23 at 10:02 +0200, Set Hallstrom wrote:
The bitrate is either 16 or 24. The samplerate is only restricted to
44.1KHz as a standalone unit. When used as a computer sound interface
you are supposed to be able to set it at the usual places between
44.1KHz and 96KHz.
On a related yet unrelated note, I have two of these and use them in a
master/slave configuration to record gigs using direct outs from our
board. I did have to make a couple of 8 port, 50dB L-pad boxes though
because the inputs on the R-16 are expecting line input at consumer
level (-10dBV) while the board puts out pro level (+4dBu). If anyone is
interested in the L-pad boxes I've posted a tutorial on my web page:
I've since found that I should have made them 40dB so now I have to swap
out the 33K ohm resistors for 10K ohm. Oh well ;-)
> Perhaps configuring jack to use 44.1 will solve the problem?
Linux-audio-user mailing list