Re: [LAU] USB audio interfaces >= 8 channels

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
To: Robin Gareus <robin@...>
Cc: Brian Quandt <brian.quandt@...>, A list for linux audio users <linux-audio-user@...>
Date: Wednesday, May 16, 2012 - 10:21 am

On Wed, May 16, 2012 at 11:26:07AM +0200, Robin Gareus wrote:

> @Fons: I remember you were measuring preamps and AD/DA behaviour not too

It depends on what you want to measure...

For the S/N ratio of a line input all you need is jnoisemeter.

If you want to measure the mic input EIN you need a bit more:

* A passive, balanced and calibrated attenuator, 70..80 dB, and having
a output impedance of 150 and/or +/- 30 ohm. In practice that means a
small metal box with 2 or 3 XLR connectors and some resistors inside.
Details on request. To calculate the attenuation you need a precise
resistance meter, but only once.

* A calibrated truly balanced - antiphase signals of equal level - line
level signal output. You could use two unbalanced outputs driven in
antiphase for this. You need a sound card with an exactly reproducable
output gain (just setting it to max will do in most cases), and measure
it using real calibrated *audio* RMS meter. Provided you can reproduce
the output gains exactly this needs to be done only once, so you could
borrow the real RMS meter from an electronics lab.

To measure AD/DA phase noise you need either a high quality analog sine
generator, or a soundcard that is at least as good as the one to be



A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)

Linux-audio-user mailing list

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
Re: [LAU] USB audio interfaces &gt;= 8 channels, Robin Gareus, (Wed May 16, 9:26 am)
Re: [LAU] USB audio interfaces >= 8 channels, Fons Adriaensen, (Wed May 16, 10:21 am)