[LAU] (no subject)

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
To: linux-audio-user@lists.linuxaudio.org <linux-audio-user@...>
Date: Thursday, April 19, 2012 - 3:50 pm

--744819306-1488663443-1334850633=:87373
Content-Type: text/plain; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable

Hello again everyone.=0A=0ASo I have blundered into a work around for this =
problem that I want to share and hopefully maybe pass the issue on upstream=
to see if the issue can be resolved properly.=0A=0ASo to recap:=0AMOBO: Gi=
gabyte GA-Z68AP-D3=0AMaudio Delta 66 Installed in PCI slot.=0A=0ACard works=
fine running with the onboard graphics (provided by the intel i5 2500K CPU=
).=0A=0AInstall MSI (NVIDIA) 7900GTO PCIe graphics card into PCIe x16 slot.=
=0A=0ACard not recognised under aplay -l or cat /asound/cards BUT is regist=
ered under lspci -vvv.=0Admesg shows the following on boot:=0A=0A[ 7838.014=
939] ICE1712 0000:06:00.0: PCI INT A -> GSI 19 (level, low) -> =0AIRQ 19=0A=
[ 7838.014967] ice1712: Using board model M Audio Delta 66=0A[ 7838.014971]=
invalid EEPROM (size =3D 145)=0A[ 7838.014987] ICE1712 0000:06:00.0: PCI I=
NT A disabled=0A[ 7838.014996] ICE1712: probe of 0000:06:00.0 failed with e=
rror -5=0A=0A=0ATried this with varying kernels and NVIDIA drivers with no =
fix.=0A=0ANOW....=0A=0ARemoving the PCIe graphics card and installing an ol=
d NVIDIA FX5500 PCI card in the other PCI slot allowed the Maudio card to b=
e recognised (although unusable due to the NVIDIA stealling the bandwidth).=
So I tried installing and old Soundblaster PCI card into the other slot wi=
th my Maudio next to it. This allows both to be recognised under aplay- l a=
s below:=0A=0Aaplay -l=0A**** List of PLAYBACK Hardware Devices ****=0Acard=
0: M66 [M Audio Delta 66], device 0: ICE1712 multi [ICE1712 multi]=0A=A0 S=
ubdevices: 0/1=0A=A0 Subdevice #0: subdevice #0=0Acard 1: PCH [HDA Intel PC=
H], device 0: ALC889 Analog [ALC889 Analog]=0A=A0 Subdevices: 1/1=0A=A0 Sub=
device #0: subdevice #0=0Acard 1: PCH [HDA Intel PCH], device 1: ALC889 Dig=
ital [ALC889 Digital]=0A=A0 Subdevices: 1/1=0A=A0 Subdevice #0: subdevice #=
0=0Aric@ric:~$ gksudo gedit /etc/modprobe.d/nvidia.conf=0Aric@ric:~$ sudo m=
odprobe snd-emu10k1=0A[sudo] password for ric: =0Aric@ric:~$ aplay -l=0A***=
* List of PLAYBACK Hardware Devices ****=0Acard 0: M66 [M Audio Delta 66], =
device 0: ICE1712 multi [ICE1712 multi]=0A=A0 Subdevices: 1/1=0A=A0 Subdevi=
ce #0: subdevice #0=0Acard 1: PCH [HDA Intel PCH], device 0: ALC889 Analog =
[ALC889 Analog]=0A=A0 Subdevices: 1/1=0A=A0 Subdevice #0: subdevice #0=0Aca=
rd 1: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]=0A=A0 =
Subdevices: 1/1=0A=A0 Subdevice #0: subdevice #0=0Acard 2: Live [SB Live! V=
alue [CT4670]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]=0A=A0=
Subdevices: 32/32=0A=A0 Subdevice #0: subdevice #0=0A=A0 Subdevice #1: sub=
device #1=0A=A0 Subdevice #2: subdevice #2=0A=A0 Subdevice #3: subdevice #3=
=0A=A0 Subdevice #4: subdevice #4=0A=A0 Subdevice #5: subdevice #5=0A=A0 Su=
bdevice #6: subdevice #6=0A=A0 Subdevice #7: subdevice #7=0A=A0 Subdevice #=
8: subdevice #8=0A=A0 Subdevice #9: subdevice #9=0A=A0 Subdevice #10: subde=
vice #10=0A=A0 Subdevice #11: subdevice #11=0A=A0 Subdevice #12: subdevice =
#12=0A=A0 Subdevice #13: subdevice #13=0A=A0 Subdevice #14: subdevice #14=
=0A=A0 Subdevice #15: subdevice #15=0A=A0 Subdevice #16: subdevice #16=0A=
=A0 Subdevice #17: subdevice #17=0A=A0 Subdevice #18: subdevice #18=0A=A0 S=
ubdevice #19: subdevice #19=0A=A0 Subdevice #20: subdevice #20=0A=A0 Subdev=
ice #21: subdevice #21=0A=A0 Subdevice #22: subdevice #22=0A=A0 Subdevice #=
23: subdevice #23=0A=A0 Subdevice #24: subdevice #24=0A=A0 Subdevice #25: s=
ubdevice #25=0A=A0 Subdevice #26: subdevice #26=0A=A0 Subdevice #27: subdev=
ice #27=0A=A0 Subdevice #28: subdevice #28=0A=A0 Subdevice #29: subdevice #=
29=0A=A0 Subdevice #30: subdevice #30=0A=A0 Subdevice #31: subdevice #31=0A=
card 2: Live [SB Live! Value [CT4670]], device 2: emu10k1 efx [Multichannel=
Capture/PT Playback]=0A=A0 Subdevices: 8/8=0A=A0 Subdevice #0: subdevice #=
0=0A=A0 Subdevice #1: subdevice #1=0A=A0 Subdevice #2: subdevice #2=0A=A0 S=
ubdevice #3: subdevice #3=0A=A0 Subdevice #4: subdevice #4=0A=A0 Subdevice =
#5: subdevice #5=0A=A0 Subdevice #6: subdevice #6=0A=A0 Subdevice #7: subde=
vice #7=0Acard 2: Live [SB Live! Value [CT4670]], device 3: emu10k1 [Multic=
hannel Playback]=0A=A0 Subdevices: 1/1=0A=A0 Subdevice #0: subdevice #0=0A=
=0ANow, you can see above that both the Maudio and the Soundblaster are bei=
ng identified as the same Device number: 0. So using this configuration fai=
ls (no way to choose between the two and it never output to the Maudio what=
ever I tried). So I blacklisted the snd-emu10k1 driver in /etc/modprobe.d/b=
lacklist.conf and that did the job - now only the Maudio is shown (and onbo=
ard if I enable it in BIOS as above). Maudio is now useable.=0A=0ANow, I do=
nt know why or how this would be happening. My only thought is that there i=
s an issue at kernel level either with how the PCI slots are being addresse=
d OR with the snd modules themselves. I should point out that when I tried =
an old PCI modem card it didnt do the job - the modem showed up in lspci -v=
vv but the eeprom error was still showing in dmesg and the Maudio was again=
not detected.=0A=0ASo Im putting the information out there in the hope tha=
t someone with more knowledge than me may be able to help diagnose the real=
cause of the issue and perhaps we can feed it into the development cycle f=
or a fix.=0A=0AIf any more info is needed then I am happy to take the time =
(with instructions as I am a dimwit) to do additional testing and informati=
on gathering.=0A=0AThanks all.
--744819306-1488663443-1334850633=:87373
Content-Type: text/html; charset=iso-8859-1
Content-Transfer-Encoding: quoted-printable

Hello again ever=
yone.So I have blundered into a work around for t=
his problem that I want to share and hopefully maybe pass the issue on upst=
ream to see if the issue can be resolved properly.So to recap:MOBO: Gigabyte GA-Z68AP-D3Maudio Delta 6=
6 Installed in PCI slot.Card works fine running w=
ith the onboard graphics (provided by the intel i5 2500K CPU).Install MSI (NVIDIA) 7900GTO PCIe graphics card into PCIe x16 =
slot.Card not recognised under aplay -l or cat /asound/cards=
BUT is registered under lspci -vvv.dmesg shows the following on=
boot:[ 7838.014939] ICE1712 0000:06:00.0: PCI INT A -> GSI 19 (leve=
l, low) -> =0AIRQ 19=0A[ 7838.014967] ice1712: Using board model M Audio=
Delta 66=0A[ 7838.014971] invalid EEPROM (size =3D 145)=0A[ 7838.014987] I=
CE1712 0000:06:00.0: PCI INT A disabled=0A[ 7838.014996] ICE1712: probe of =
0000:06:00.0 failed with error -5T=
ried this with varying kernels and NVIDIA drivers with no fix.NOW....Removing the PCIe graphics ca=
rd and installing an old NVIDIA FX5500 PCI card in the other PCI slot allow=
ed the Maudio card to be recognised (although unusable due to the NVIDIA st=
ealling the bandwidth). So I tried installing and old Soundblaster PCI card=
into the other slot with my Maudio next to it. This allows both to be reco=
gnised under aplay- l as below:aplay -l**** L=
ist of PLAYBACK Hardware Devices ****card 0: M66 [M Audio Delta 66], de=
vice 0: ICE1712 multi [ICE1712 multi]  Subdevices: 0/1  S=
ubdevice #0: subdevice #0card 1: PCH [HDA Intel PCH], device 0: ALC889 =
Analog [ALC889 Analog]  Subdevices: 1/1  Subdevice #0: su=
bdevice #0card 1: PCH [HDA
Intel PCH], device 1: ALC889 Digital [ALC889 Digital]  Subdevices=
: 1/1  Subdevice #0: subdevice #0ric@ric:~$ gksudo gedit /etc/=
modprobe.d/nvidia.confric@ric:~$ sudo modprobe snd-emu10k1[sudo] pa=
ssword for ric: ric@ric:~$ aplay -l**** List of PLAYBACK Hardware D=
evices ****card 0: M66 [M Audio Delta 66], device 0: ICE1712 multi [ICE=
1712 multi]  Subdevices: 1/1  Subdevice #0: subdevice #0<=
br>card 1: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]=
  Subdevices: 1/1  Subdevice #0: subdevice #0card 1: PCH =
[HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]  Subdev=
ices: 1/1  Subdevice #0: subdevice #0card 2: Live [SB Live! Va=
lue [CT4670]], device 0: emu10k1 [ADC Capture/Standard PCM Playback]&nb=
sp; Subdevices: 32/32  Subdevice #0: subdevice #0  Subdev=
ice #1: subdevice #1  Subdevice #2: subdevice #2 
Subdevice #3: subdevice #3  Subdevice #4: subdevice #4  =
Subdevice #5: subdevice #5  Subdevice #6: subdevice #6  S=
ubdevice #7: subdevice #7  Subdevice #8: subdevice #8  Su=
bdevice #9: subdevice #9  Subdevice #10: subdevice #10  S=
ubdevice #11: subdevice #11  Subdevice #12: subdevice #12&nbsp=
; Subdevice #13: subdevice #13  Subdevice #14: subdevice #14&n=
bsp; Subdevice #15: subdevice #15  Subdevice #16: subdevice #16  Subdevice #17: subdevice #17  Subdevice #18: subdevice #18=
  Subdevice #19: subdevice #19  Subdevice #20: subdevice =
#20  Subdevice #21: subdevice #21  Subdevice #22: subdevi=
ce #22  Subdevice #23: subdevice #23  Subdevice #24: subd=
evice #24  Subdevice #25: subdevice #25  Subdevice #26: s=
ubdevice #26  Subdevice #27: subdevice #27 
Subdevice #28: subdevice #28  Subdevice #29: subdevice #29&nb=
sp; Subdevice #30: subdevice #30  Subdevice #31: subdevice #31=
card 2: Live [SB Live! Value [CT4670]], device 2: emu10k1 efx [Multichannel=
Capture/PT Playback]  Subdevices: 8/8  Subdevice #0: sub=
device #0  Subdevice #1: subdevice #1  Subdevice #2: subd=
evice #2  Subdevice #3: subdevice #3  Subdevice #4: subde=
vice #4  Subdevice #5: subdevice #5  Subdevice #6: subdev=
ice #6  Subdevice #7: subdevice #7card 2: Live [SB Live! Value=
[CT4670]], device 3: emu10k1 [Multichannel Playback]  Subdevices:=
1/1  Subdevice #0: subdevice #0Now, you=
can see above that both the Maudio and the Soundblaster are being identifi=
ed as the same Device number: 0. So using this configuration fails (no way =
to choose between the two and it never output to the Maudio whatever
I tried). So I blacklisted the snd-emu10k1 driver in /etc/modprobe.d/black=
list.conf and that did the job - now only the Maudio is shown (and onboard =
if I enable it in BIOS as above). Maudio is now useable.Now, I dont know why or how this would be happening. My only thought=
is that there is an issue at kernel level either with how the PCI slots ar=
e being addressed OR with the snd modules themselves. I should point out th=
at when I tried an old PCI modem card it didnt do the job - the modem showe=
d up in lspci -vvv but the eeprom error was still showing in dmesg and the =
Maudio was again not detected.So Im putting the i=
nformation out there in the hope that someone with more knowledge than me m=
ay be able to help diagnose the real cause of the issue and perhaps we can =
feed it into the development cycle for a fix.If a=
ny more info is needed then I am happy to take the time (with
instructions as I am a dimwit) to do additional testing and information ga=
thering.Thanks all.=

--744819306-1488663443-1334850633=:87373--

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

This is the only confirmed message in this thread.
Possibly related messages: