linuxaudio.org

On 15 March 2012 at 16:08, Bob van der Poel  wrote:
> On Thu, Mar 15, 2012 at 3:06 PM, Jan Depner  wrote:

quoted text
>

> > Little known fun fact - if the on/off switch is in the on position, even

> > though you don't have the power cable in or batteries in it, nothing

> > will happen when you attach it to the USB port.  Brilliant design!  If

> > it's switched off it should come up saying ">AUDIO INTERFACE".  Press

> > the right arrow to switch it to ">CARD READER" then press ENTER followed

> > by ENTER, and it should show up on your system.  There will be PROJnnn

> > directories where the AUDIO data will be stored.

>

> Okay, tried it again. And, it works :)

>

> Silly me ... It didn't occur to me that the computer needed to be

> connected at the time of selection. I just thought one set the port to

>  and then you could plug/unplug ... like a camera :)

>

> Nope.

>

> For others as dumb as me:

>

> 1. Plug the square end of the USB cable into the R16

> 2. Plug the flat end into the computer.

> 3. If the R16 was ON then hit the USB button and select

>     or

>     If the R16 was OFF then the menu should come up.

>

> Either way, when you unplug the cable you lose the connection and need

> to go back to <1>.

>

> Honestly, I think it is easier to just pull the card and use that

> directly in the computer :)

Pulling the card is a good way to get data out of the unit.  But,

does it work as a control surface for Linux audio applications?
Thanks.... 
--

Kevin
_______________________________________________

Linux-audio-user mailing list

Linux-audio-user@lists.linuxaudio.org

http://lists.linuxaudio.org/listinfo/linux-audio-user