[LAU] First netjack test using jackd2: ecasound transport doesn't move

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
To: <linux-audio-user@...>
Date: Saturday, February 25, 2012 - 2:32 am

These are my first netjack experiments, ever.
I followed this reference:

http://trac.jackaudio.org/wiki/WalkThrough/User/NetJack

Here is what I did:

#### sound server side (with local soundcard)

$ jackd -d alsa hw:0,0 -r 44100

$ jack_netsource -H thinkpad

Connected :-)
netjack: at frame 000051 -> total netxruns 1 (1%) queue time= 93121

$ ecasound -i test.wav -o jack,system

[ sound plays ]

^C

#### client side

$ jackd -d netone

NetOne driver started
AutoConfig Override !!!
AutoConfig Override: Master JACK sample rate = 44100
AutoConfig Override: capture_channels_audio = 2
AutoConfig Override: capture_channels_midi = 1
AutoConfig Override: playback_channels_audio = 2
AutoConfig Override: playback_channels_midi = 1
MTU is set to 1400 bytes

$ jack_lsp

system:capture_1
system:capture_2
system:capture_3
system:playback_1
system:playback_2
system:playback_3

$ ecasound -i cdda.wav -f f32_le,2,44100 -o jack,, -c

for TRANSPORT settings: send sendrec notransport

for JACK CLIENT setting: "system" and "system:playback_1"

The transport stays stuck at position 0.0, and the
'start' command does not start the engine,
which remains in status 'stopped'.

Grateful for ideas where I should go next,

Thanks,

--
Joel Roth
_______________________________________________
Linux-audio-user mailing list
Linux-audio-user@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-user

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
[LAU] First netjack test using jackd2: ecasound transport do..., Joel Roth, (Sat Feb 25, 2:32 am)