Falktx has created something called Catia that is similar to the Jack
"connect" interface. After looking in there, it was clear that pd had no
output connection.
I simply hooked things up and all was well.
Now I've gotta figure out what the hell I was thinking when I created that
pd patch.
This is where I usually jump on the developer for not commenting his code.
It was me though. Damn.
On Aug 21, 2011 6:45 PM, "Marco Donnarumma" wrote:
23814
JACK
JACK
the
terminal
"false"
"false"
"false"
"false"
"false"
built
"false"
"false"
"false"
"false"
"false"
playback:
23814
to
JACK
JACK
JACK
main
have
something
either
but
I actually figured it out.
Falktx has created something called Catia that is similar to the Jack &q=
uot;connect" interface.=A0 After looking in there, it was clear that p=
d had no output connection.
I simply hooked things up and all was well.
Now I've gotta figure out what the hell I was thinking when I create=
d that pd patch.
This is where I usually jump on the developer for not commenting his cod=
e.=A0 It was me though. Damn.
On Aug 21, 2011 6:45 PM, "Marco Donnarumma&=
quot; <devel@thesaddj.com> =
wrote:> From the jack log it seems that jack si=
nk for PA is launched on startup
39; with PID 22834> > Sun Aug 21 11:09:48 2011: New client &#=
39;a2j' with PID 23755> > Sun Aug 21 11:09:48 2011: New c=
lient 'PulseAudio JACK Sink' with PID 23814
k:front-left' to> 'system:playback_1'> > S=
un Aug 21 11:09:48 2011: Connecting 'PulseAudio JACK Sink:front-right&#=
39; to
New client 'PulseAudio JACK Source' with PID 23814> >=
; Sun Aug 21 11:09:48 2011: Connecting 'system:capture_1' to 'P=
ulseAudio JACK
ecting 'system:capture_2' to 'PulseAudio JACK> Source:fr=
ont-right'> > Whereas that is useful to get always audio =
from the internet browser and the
e> ports.> Sometimes when ports are already in use Pd might f=
ail to connect.> > I would try to launch jack with no other c=
lients connected (in your case
rminal> with the jack flag.> > M> > =
head in PD that I can't>> even remember what all of the piec=
es of my fiddle script is doing (that's>> another email for a=
nother list, I think....)
hen I click on 'test audio and midi', I get the following DIO
;, of course) :>> error: channels: can't open>> err=
or: 2: can't open>> audio I/O error history:>> seco=
nds ago error type
warning: tone-osc: multiply defined>> warning: tone-mon: multiply=
defined>> warning: tone-osc: multiply defined>> warnin=
g: tone-mon: multiply defined
sages within Jack regarding any of this.>>>> Here's=
my Jack log:>>>> Sun Aug 21 11:09:33 2011: Loading set=
tings from
.>>>> Sun Aug 21 11:09:33 2011: setting engine option &=
quot;driver" to value "alsa">>>> Sun Aug=
21 11:09:33 2011: driver "alsa" selected
realtime" to value "false">>>> Sun Aug 2=
1 11:09:33 2011: setting engine option "verbose" to value "f=
alse"
client-timeout" to value>> "500">>&g=
t;> Sun Aug 21 11:09:33 2011: setting for driver "net" found
my" found>>>> Sun Aug 21 11:09:33 2011: setting fo=
r driver "alsa" found>>>> Sun Aug 21 11:09:33=
2011: setting driver option "device" to value "hw:0"
rate" to value "44100">>>> Sun Aug 21 11=
:09:33 2011: setting driver option "period" to value "1024&q=
uot;
nperiods" to value "3">>>> Sun Aug 21 11=
:09:33 2011: setting driver option "hwmon" to value "false&q=
uot;
hwmeter" to value "false">>>> Sun Aug 21=
11:09:33 2011: setting driver option "duplex" to value "tru=
e"
softmode" to value "false">>>> Sun Aug 2=
1 11:09:33 2011: setting driver option "monitor" to value "f=
alse"
dither" to value "n">>>> Sun Aug 21 11:0=
9:33 2011: setting driver option "shorts" to value "false&qu=
ot;
pback" found>>>> Sun Aug 21 11:09:33 2011: setting=
for driver "netone" found>>>> Sun Aug 21 11:=
09:33 2011: setting for driver "firewire" found
etmanager" found>>>> Sun Aug 21 11:09:33 2011: set=
ting for internal "profiler" found>>>> Sun Au=
g 21 11:09:33 2011: setting for internal "audioadapter" found
etadapter" found>>>> Sun Aug 21 11:09:33 2011: Lis=
tening for D-Bus messages>>>> Sun Aug 21 11:09:42 2011:=
------------------
n 1.9.7 (4236) built>> on Thu Jun 16 13:33:27 2011>>>> Sun Aug 21 11:09:42 2011: Loading settings from>> "=
;/home/aaron/.config/jack/conf.xml" using expat_2.0.1 ...
driver" to value "alsa">>>> Sun Aug 21 1=
1:09:42 2011: driver "alsa" selected>>>> Sun =
Aug 21 11:09:42 2011: setting engine option "realtime" to value &=
quot;false"
verbose" to value "false">>>> Sun Aug 21=
11:09:42 2011: setting engine option "client-timeout" to value
setting for driver "net" found>>>> Sun Aug 21=
11:09:42 2011: setting for driver "dummy" found>>
d>>>> Sun Aug 21 11:09:42 2011: setting driver option &=
quot;device" to value "hw:0">>>> Sun Aug=
21 11:09:42 2011: setting driver option "rate" to value "44=
100"
period" to value "1024">>>> Sun Aug 21 1=
1:09:42 2011: setting driver option "nperiods" to value "3&q=
uot;
hwmon" to value "false">>>> Sun Aug 21 1=
1:09:42 2011: setting driver option "hwmeter" to value "fals=
e"
duplex" to value "true">>>> Sun Aug 21 1=
1:09:42 2011: setting driver option "softmode" to value "fal=
se"
monitor" to value "false">>>> Sun Aug 21=
11:09:42 2011: setting driver option "dither" to value "n&q=
uot;
shorts" to value "false">>>> Sun Aug 21 =
11:09:42 2011: setting for driver "loopback" found>>
und>>>> Sun Aug 21 11:09:42 2011: setting for driver &q=
uot;firewire" found>>>> Sun Aug 21 11:09:42 2011: =
setting for internal "netmanager" found
rofiler" found>>>> Sun Aug 21 11:09:42 2011: setti=
ng for internal "audioadapter" found>>>> Sun =
Aug 21 11:09:42 2011: setting for internal "netadapter" found
br>>>>> Sun Aug 21 11:09:47 2011: JACK server starting in n=
on-realtime mode
udio.service aka>> jackdbus).>>>> 11:09:48.05=
4 ALSA connection graph change.>>>> Sun Aug 21 11:09:47=
2011: control device hw:0
gt;>> Sun Aug 21 11:09:47 2011: Acquired audio card Audio0>=
;>>> Sun Aug 21 11:09:47 2011: creating alsa driver ...
t;> Sun Aug 21 11:09:47 2011: control device hw:0>>>>=
; Sun Aug 21 11:09:47 2011: configuring for 44100Hz, period =3D 1024 frames=
>> (23.2 ms), buffer =3D 3 periods>>>> Sun Aug 21=
11:09:47 2011: ALSA: final selected sample format for capture:>>=
16bit little-endian>>>> Sun Aug 21 11:09:47 2011: ALSA=
: use 3 periods for capture
format for playback:>> 32bit integer little-endian>>>> Sun Aug 21 11:09:47 2011: ALSA: use 3 periods for playback
;system:capture_1'>>>> Sun Aug 21 11:09:47 2011: Ne=
w client 'system' with PID 0>>>> Sun Aug 21 11:=
09:47 2011: graph reorder: new port 'system:capture_2'
;system:playback_1'>>>> Sun Aug 21 11:09:47 2011: g=
raph reorder: new port 'system:playback_2'>>>> =
Sun Aug 21 11:09:47 2011: New client 'cadence' with PID 22834
h PID 23755>>>> Sun Aug 21 11:09:48 2011: New client &#=
39;PulseAudio JACK Sink' with PID 23814>>>> Sun Aug=
21 11:09:48 2011: Connecting 'PulseAudio JACK Sink:front-left' to<=
br>
09:48 2011: Connecting 'PulseAudio JACK Sink:front-right' to>=
;> 'system:playback_2'>>>> Sun Aug 21 11:09:=
48 2011: New client 'PulseAudio JACK Source' with PID
'system:capture_1' to 'PulseAudio JACK>> Source:fron=
t-left'>>>> Sun Aug 21 11:09:48 2011: Connecting &#=
39;system:capture_2' to 'PulseAudio JACK
stics reset.>>>> 11:09:49.979 Client activated.>=
754>>>>>>>> Thanks, all.>>=
;>>>> -Aaron>>>>>>
, Aug 21, 2011 at 10:47 AM, <ha=
rryhaaren@gmail.com> wrote:>>>>> Pasuspender =
is a way to make PulseAudio let go of the soundcard when JACK
is the main>>> sound daemon, but as KX uses JACK for all its =
audio needs, it will not have>>> any effect.>>>
are you passing any>>> special arguments to your "dac~&qu=
ot; in the patch? like "dac~ 1 2" or something>>> to=
open the first & second channel? I've had problems there before, e=
ither
the details, but>>> perhaps that's it?>>>>>> -Harry>>>>>>> > <=
br>
rts Practitioner, Performer, Teacher> ACE, Sound Design MSc by Resea=
rch (ongoing)> The University of Edinburgh, UK> ~~~~~~~~~~~~~=
~~~~~~~~~~~~~~~~
ma.com> Research: htt=
p://res.marcodonnarumma.com | http:=
//www.thesaddj.com |
ctor: http://www.liveperfo=
rmersmeeting.net
--001517440fa2e611f204ab111b67--
Previous message: [thread] [date] [author] Next message: [thread] [date] [author]
This is the only confirmed message in this thread.
Possibly related messages:
Re: [LAU] starting pd-extended 0.42.5 by Aaron L. on Aug 22, 5:11 am 2011