linuxaudio.org

Excerpts from Geoff King's message of 2010-05-08 01:17:39 +0200:

quoted text
> Hello,

> I have problem that I've been trying to figure out with no luck.  The

> audio interface keeps changing for example:

>

> Today:  Maudio 24/96 is hw:1 and Midisport 4x4 Anniv is hw:0.

> Yesterday before reboot: Maudio 24/96 is hw:0 and Midisport 4x4 Anniv is hw:1

> etc, back and forth, each reboot...

> I usually use qjackctl and have to keep changing the presets with

> settings which is annoying.

>

> I would greatly appreciate it if someone could provide me some clues

> or links on how to fix this?

>

> I'm Using Fedora 12 w CCRMA.

>

> thanks, Geoff

The easiest solution might be, using my setup as example:
aplay -l

**** List of PLAYBACK Hardware Devices ****

card 0: UA25 [UA-25], device 0: USB Audio [USB Audio]

  Subdevices: 0/1

  Subdevice #0: subdevice #0

card 1: Intel [HDA Intel], device 0: ALC268 Analog [ALC268 Analog]

  Subdevices: 1/1

  Subdevice #0: subdevice #0
So I use hw:UA25 in jack instead of hw:0

Jack always uses this device if it can find it, it always just works.

If you have multiple other devices you need hardwired you might need

some other trickery, but I guess in your case it's a simple matter of

figuring out the right name for the maudio interface.

-- 
Regards,

Philipp
_______________________________________________

Linux-audio-user mailing list

Linux-audio-user@lists.linuxaudio.org

http://lists.linuxaudio.org/listinfo/linux-audio-user