Re: [LAU] Step-by-step instructions to have Linux recognize Audiofire 12 Firewire device?

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
To: <gnome@...>, <linux-audio-user@...>
Date: Monday, March 8, 2010 - 8:50 am

--00c09f8c1c79ddb02d0481462653
Content-Type: text/plain; charset=ISO-8859-1

Hey,

After the modprobe, there should be a device called "raw1394" in /dev?
As a normal user try "$ : /dev/raw1394", it should give you a permission
denied...?
Chmod 777 it (or 755 or whatever.. I 777 all my audio stuff... :-)

JACK should be allowed access it now, as "Driver" you'll need to select
"FireWire" yes.

As for the firewire card, I'd check that out first... Texas Instrument chips
are known to
work well, Ricoh chips can give problems for some reason.. (AFAIK, i dont
have one!)

Hope this gets you a little closer! -Harry

Thanks, we tried it today with PureDyne 9.10 "Carrot and Coriander".

--00c09f8c1c79ddb02d0481462653
Content-Type: text/html; charset=ISO-8859-1
Content-Transfer-Encoding: quoted-printable

Hey,After the modprobe, there should be a device called "raw13=
94" in /dev? As a normal user try "$ : /dev/raw1394", it=
should give you a permission denied...?Chmod 777 it (or 755 or whateve=
r..=A0 I=A0 777 all my audio stuff... :-)
JACK should be allowed access it now, as "Driver" you'll =
need to select "FireWire" yes.As for the firewire card, I=
'd check that out first... Texas Instrument chips are known towork =
well, Ricoh chips can give problems for some reason.. (AFAIK, i dont have o=
ne!)
Hope this gets you a little closer! -Harry
Thanks, we tried it today with PureDyne 9.10 "Carrot a=
nd Coriander".

modprobe and chmod reported no errors, but JACK didn't recognize the
AudioFire12.

When you say "backend" in QJackCtl, are you talking about the dri=
ver, or
something else? I just noticed now (at home on my laptop without any
firewire device) that there's a "firewire" option on the Driv=
er drop down.

We use a Firewire 800 PCIExpress card, I forget the brand. I didn't hav=
e
the time to check to see if the card is being recognized.

--00c09f8c1c79ddb02d0481462653--

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
Re: [LAU] Step-by-step instructions to have Linux recognize ..., Harry Van Haaren, (Mon Mar 8, 8:50 am)