linuxaudio.org

Hello Fons,
Yeah, I can't understand what's going on. The odd thing is that I tried wit=

h

different monitors (Roland DM-20) and the signal level seems fine, a little

high but not as dramatically high as with the ADAMs... I have no idea what'=

s

going on. I just got response from Edirol's support and their only

suggestion is to use a mixer (and the mention the +4dBu nominal output).

I'll try now contacting ADAM's support.
Cheers,
Hector
On 8/24/07, Fons Adriaensen  wrote:

quoted text
>

> On Fri, Aug 24, 2007 at 12:29:52PM -0400, Hector Centeno wrote:

>

> > ... but the problem is that if I lower the volume on the

> > software side and I increase the level on the monitors, then I start

> hearing

> > a lot of noise mixed with the (now lower) sound signal (since the analo=

g

quoted text
> out

> > of the FA-101 is still high).

>

> Still this is not normal. The nominal output level of the FA101 is

> +4dBu, nothing special, with a S/N ratio of over 100 dB. The maximum

> SPL of the ADAM A7 is somthing like 105 dB, so even if its nominal

> input level is 20dB lower than the output of the FA101 the noise

> level should be 25dB, which is imperceptible even in a very quiet

> room.

>

> Something is not working right here.

>

>

> --

> FA

>

> Follie! Follie! Delirio vano =E8 questo !

>

>

>

--=20

=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=

=3D=3D=3D=3D=3D=3D

http://www.hcenteno.net