> --- Stephen Cameron wrote:
> >
> > Mark Krecht wrote:
> >
> > [snip]
> > > BTW - You can always take the ADAT cable and connected it from the
> > > output back to an input, send audio out and then see if you can record
> > > audio coming back in. It's a simple test to make sure the
> > > Alsa/Hammerfall set up is actually working. If that fails the problem
> > > is in your Linux setup, or the ADAT cables. If it works then it's
> > > either in the mixer or an interface problem where the mixer and the
> > > Hammerfall are not somehow compatible. (Or how you've configured your
> > > mixer I suppose....
> >
> > Oh, now that's a good idea. I can probably do the same
> > on the AW as well. Thanks.
> >
> > I found jackbitscope here, btw:
> >
http://www.ecs.soton.ac.uk/~njl98r/code/ladspa/bitscope/
> > Thanks for that...
> >
> > I'll post what I find out tonight.
>
> Well, something came up and I wasn't able to try out as much
> as I wanted to last night, but I did try the loopback test
> with the AW4416 talking to itself over 50 foot ADAT cable,
> and that worked. At least I know it's possible to use the
> cables under some circumstance.
>
> -- steve