Re: [LAD] Mixing audio: Implementing pan and balance

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
To: <linux-audio-dev@...>
Date: Tuesday, March 12, 2013 - 9:22 pm

On Tue, Mar 12, 2013 at 04:24:49PM -0400, Tim E. Real wrote:

> Interesting about the crossover bit.

The rationale behind this is that at LF the L and R signals will add more
or less in phase, while at HF the phases are random and what gets added is
the power.

The mixer app I've been developing has only Ambisonic panning. If you
want stereo, you use a first order horizontal only bus (3 channels),
use the -45 to +45 degrees range of the panner, and decode to stereo
in the master strip. Then it's that decoder that determines the relative
center gain of the panner, and it's no problem to make it frequency
dependent so you get -6 dB at LF and -3 dB at HF.

> I will look at having separate pan controls for each channel on one strip,

A2 had this, but no way to change the relative gains of L and R.
The full matrix from L,R to L',R' has four coefficients. One of
those factors out as channel gain, so three remain. So a really
universal stereo -> stereo 'panner' must have three independent
controls.

Ciao,

--
FA

A world of exhaustive, reliable metadata would be an utopia.
It's also a pipe-dream, founded on self-delusion, nerd hubris
and hysterically inflated market opportunities. (Cory Doctorow)

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-dev

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
[LAD] Mixing audio: Implementing pan and balance, Tim E. Real, (Tue Mar 12, 5:23 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Fons Adriaensen, (Tue Mar 12, 9:56 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Tim E. Real, (Tue Mar 12, 8:25 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Fons Adriaensen, (Tue Mar 12, 9:22 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Tim E. Real, (Wed Mar 13, 8:16 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Paul Davis, (Wed Mar 13, 11:34 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Paul Davis, (Tue Mar 12, 8:28 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Tim E. Real, (Tue Mar 12, 9:15 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Geoff Beasley, (Tue Mar 12, 9:41 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Tim E. Real, (Tue Mar 12, 7:08 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Jörn Nettingsmeier, (Thu Mar 14, 10:42 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Tim E. Real, (Fri Mar 15, 11:57 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Paul Davis, (Thu Mar 14, 11:37 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Jörn Nettingsmeier, (Thu Mar 14, 6:50 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Ralf Mardorf, (Sat Mar 16, 10:17 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Fred Gleason, (Sat Mar 16, 11:51 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Ricardus Vincente, (Sat Mar 16, 7:47 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Paul Davis, (Sun Mar 17, 10:54 am)
[LAD] OT: Mixing audio: Implementing pan and balance, Ralf Mardorf, (Sat Mar 16, 2:20 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Paul Davis, (Sat Mar 16, 1:25 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Fons Adriaensen, (Sat Mar 16, 6:23 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Raphaël BOLLEN, (Sat Mar 23, 5:05 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Raphaël BOLLEN, (Sun Mar 24, 8:07 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Raphaël BOLLEN, (Sun Mar 24, 8:46 am)
Re: [LAD] Mixing audio: Implementing pan and balance, hermann meyer, (Sun Mar 24, 9:50 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Raphaël BOLLEN, (Sun Mar 24, 10:10 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Jörn Nettingsmeier, (Sun Mar 24, 12:57 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Fons Adriaensen, (Sun Mar 24, 11:57 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Raphaël BOLLEN, (Sun Mar 24, 1:01 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Fons Adriaensen, (Sun Mar 24, 3:11 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Raphaël BOLLEN, (Sun Mar 24, 4:18 pm)
[LAD] zita-mu1 denormals, Fons Adriaensen, (Wed Mar 27, 11:48 am)
Re: [LAD] zita-mu1 denormals, Raphaël BOLLEN, (Wed Mar 27, 2:21 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Ralf Mardorf, (Sat Mar 16, 8:28 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Ralf Mardorf, (Sat Mar 16, 10:21 am)
Re: [LAD] Mixing audio: Implementing pan and balance, Paul Davis, (Thu Mar 14, 7:01 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Tim E. Real, (Tue Mar 12, 7:21 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Paul Davis, (Tue Mar 12, 7:13 pm)
Re: [LAD] Mixing audio: Implementing pan and balance, Tim E. Real, (Tue Mar 12, 7:44 pm)