Re: [LAD] [RME - hdsp] Multiface/Digiface/RPM detection

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

To: <linux-audio-dev@...>

Subject: Re: [LAD] [RME - hdsp] Multiface/Digiface/RPM detection

Date: Friday, July 29, 2011 - 8:05 am

On Fri, Jul 29, 2011 at 12:43:02AM +0200, Adrian Knoth wrote:
> ...

quoted text>

> Nope, it was correct. I got confused by bytes-vs-4byte-offsets to the

> iobase.

>

> So, control2Reg is right, the logic is right, too.

>

> Only HDSP_VERSION_BIT seems wrong here, try

>

>    HDSP_VERSION_BIT | HDSP_S_LOAD

>

> instead. Or change

>

> #define HDSP_VERSION_BIT        0x100

>

> to

>

> #define HDSP_VERSION_BIT        (0x100 | HDSP_S_LOAD)

>

> Still pure guesswork.
If you can send me the complete driver source so I just have

to do make and make install I could probably try it out during

the weekend. But the amount of time I can spend on it is limited.
--

FA
_______________________________________________

Linux-audio-dev mailing list

Linux-audio-dev@lists.linuxaudio.org

http://lists.linuxaudio.org/listinfo/linux-audio-dev

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:

[LAD] [RME - hdsp] Multiface/Digiface/RPM detection, Adrian Knoth, (Thu Jul 28, 8:31 pm)

Re: [LAD] [RME - hdsp] Multiface/Digiface/RPM detection, Paul Davis, (Thu Jul 28, 10:22 pm)

Re: [LAD] [RME - hdsp] Multiface/Digiface/RPM detection, Fons Adriaensen, (Thu Jul 28, 9:41 pm)

Re: [LAD] [RME - hdsp] Multiface/Digiface/RPM detection, Adrian Knoth, (Thu Jul 28, 9:56 pm)

Re: [LAD] [RME - hdsp] Multiface/Digiface/RPM detection, Adrian Knoth, (Thu Jul 28, 10:43 pm)

Re: [LAD] [RME - hdsp] Multiface/Digiface/RPM detection, Fons Adriaensen, (Fri Jul 29, 8:05 am)

Re: [LAD] [RME - hdsp] Multiface/Digiface/RPM detection, Adrian Knoth, (Thu Jul 28, 10:29 pm)