Re: [LAD] Is it possible to use two RME cards in sync?

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]
To: Florian Faber <faber@...>
Cc: linux-audio-dev@lists.linuxaudio.org <linux-audio-dev@...>
Date: Thursday, May 13, 2010 - 1:14 pm

Florian Faber wrote

Just for the record: the two hammerfalls in sync with a virtual "multi"
device defined in .asoundrc worked like a charm, giving a total of 51
i/o channels. I tested both the capture and playback.
Below, the jack command and ~/.asoundrc file used.

Thanks!
P

----------

jackd -d alsa -d rmemulti

.asoundrc:
pcm.rme0 {
type hw
card 0
}
pcm.rme3 {
type hw
card 3
}
pcm.rmemulti {
type multi
slaves.a.pcm rme0
slaves.a.channels 26
slaves.b.pcm rme3
slaves.b.channels 26

bindings.0.slave a
bindings.0.channel 0
bindings.1.slave a
bindings.1.channel 1
bindings.2.slave a
bindings.2.channel 2
bindings.3.slave a
bindings.3.channel 3
bindings.4.slave a
bindings.4.channel 4
bindings.5.slave a
bindings.5.channel 5
bindings.6.slave a
bindings.6.channel 6
bindings.7.slave a
bindings.7.channel 7
bindings.8.slave a
bindings.8.channel 8
bindings.9.slave a
bindings.9.channel 9
bindings.10.slave a
bindings.10.channel 10
bindings.11.slave a
bindings.11.channel 11
bindings.12.slave a
bindings.12.channel 12
bindings.13.slave a
bindings.13.channel 13
bindings.14.slave a
bindings.14.channel 14
bindings.15.slave a
bindings.15.channel 15
bindings.16.slave a
bindings.16.channel 16
bindings.17.slave a
bindings.17.channel 17
bindings.18.slave a
bindings.18.channel 18
bindings.19.slave a
bindings.19.channel 19
bindings.20.slave a
bindings.20.channel 20
bindings.21.slave a
bindings.21.channel 21
bindings.22.slave a
bindings.22.channel 22
bindings.23.slave a
bindings.23.channel 23
bindings.24.slave a
bindings.24.channel 24
bindings.25.slave a
bindings.25.channel 25

bindings.26.slave b
bindings.26.channel 0
bindings.27.slave b
bindings.27.channel 1
bindings.28.slave b
bindings.28.channel 2
bindings.29.slave b
bindings.29.channel 3
bindings.30.slave b
bindings.30.channel 4
bindings.31.slave b
bindings.31.channel 5
bindings.32.slave b
bindings.32.channel 6
bindings.33.slave b
bindings.33.channel 7
bindings.34.slave b
bindings.34.channel 8
bindings.35.slave b
bindings.35.channel 9
bindings.36.slave b
bindings.36.channel 10
bindings.37.slave b
bindings.37.channel 11
bindings.38.slave b
bindings.38.channel 12
bindings.39.slave b
bindings.39.channel 13
bindings.40.slave b
bindings.40.channel 14
bindings.41.slave b
bindings.41.channel 15
bindings.42.slave b
bindings.42.channel 16
bindings.43.slave b
bindings.43.channel 17
bindings.44.slave b
bindings.44.channel 18
bindings.45.slave b
bindings.45.channel 19
bindings.46.slave b
bindings.46.channel 20
bindings.47.slave b
bindings.47.channel 21
bindings.48.slave b
bindings.48.channel 22
bindings.49.slave b
bindings.49.channel 23
bindings.50.slave b
bindings.50.channel 24
bindings.51.slave b
bindings.51.channel 25

}

_______________________________________________
Linux-audio-dev mailing list
Linux-audio-dev@lists.linuxaudio.org
http://lists.linuxaudio.org/listinfo/linux-audio-dev

Previous message: [thread] [date] [author]
Next message: [thread] [date] [author]

Messages in current thread:
Re: [LAD] Is it possible to use two RME cards in sync?, Florian Faber, (Mon May 10, 3:32 pm)
Re: [LAD] Is it possible to use two RME cards in sync?, Frank Smith, (Tue May 11, 8:38 am)
Re: [LAD] Is it possible to use two RME cards in sync?, Florian Faber, (Mon May 10, 5:18 pm)
Re: [LAD] Is it possible to use two RME cards in sync?, Pau , (Thu May 13, 1:14 pm)