> On Thu, 20 Aug 2009, Raymond Martin wrote:
> >>> I can't get that functionality currently. I tried changing the setting
> >>> all different ways and it only sounds like it is cutting or boosting
> >>> frequencies. The sweeping does not seem to be happening. Your docs also
> >>> indicate that the pedal is needed for this. What gives?
> >>
> >> I had trouble with this, too. See my other post for "good" settings.
> >
> > Which post would that be?
>
> Hmmm... the one on LAU... sorry... see below.
>
> ===================================================================
> From
gabriel@teuton.org Thu Aug 20 08:46:20 2009
> Date: Thu, 20 Aug 2009 08:46:00 -0500 (CDT)
> From: Gabriel M. Beddingfield
> To: Fons Adriaensen
> Cc:
linux-audio-user@lists.linuxaudio.org
> Subject: Re: [LAU] Auto-wah plugin
>
>
> Hi All,
>
> On Wed, 19 Aug 2009, Fons Adriaensen wrote:
> > The plugin could do both at a time, the 'foot' control would then
> > shift the fequency range.
>
> Nice Wah! Thanks for the plugin! I played with this plugin last night
> and thought I would share the settings I liked best.
>
> Rig: Elect. Guit. w/humbuckers. I think I used the
> neck pickup.
> PodXT Live with AC-30 amp and Tube Screamer
> JACK Rack controlled by FCB-1010
> Strong signal to audio card
>
> Tone: Santana-like
>
> Manual Wah Settings:
>
> Drive: -20
> Decay: 0
> Range: 0
> Freq.: Set the expression pedal so that it sweeps
> between .4 (heel) and .75 (toe)
> Mix: 1.0
>
> Auto-Wah Settings:
>
> Drive: Between -20 and -12
> Decay: Between 0 and about .13
> Range: Between 0 and .5
> Freq.: 0.4
> Mix: 1.0
>
> Hope this helps,